Digi Coat Sublimation Coating allows you to coat a wide range of substrates to accept sublimationtransfer inks, without the need to employ a commercial coating company.

HOW TO COAT VIDEOS USING DIGICOAT PRODUCTS

Digi-Coat Adhesion Promoter
for Sublimation Coating

POLYESTER SUBLIMATION COATING
 for Coating you own Blanks

Hilord’s Poly-Hi Coatings for Dye Sublimation
 Sublimation Coatings
Hilord Inks ensure:
· Vibrant, brilliant colors
· Consistent Color and Density
· Competitively priced
· Ability to expand the uses of dye sublimation onto new substrates
Specifications:
· Transfer conditions:
· Standard temperature = 400°F (204°C)
· Standard pressure = 8 -10 psi
· Standard time = 355 seconds (Conditions will vary per substrate.)
· Standard Substrates: Glass, metals, ceramic tiles, fabrics, etc.

Please click for a printable version of the

UV CURING SYSTEMS

Please click for a printable version of the

SUB-889 Air Dry Coating for Cotton Fabrics
      (appearance milky white , temp 180-190 degress
       for 45-60 secs, press pressure 15-25
NO UV UNIT NEEDED

SUB-837 Air Dry Coating for Polyester (apearance     
       slighly yellow,temp 180-190, for 45-60 sec, 
        press pressure 15-25  

Please click for a printable version of the

SUB-825 UV Curable, Coating for Aluminum, Hard Surfaces
SS, etc (appearance white , temp 185-195 degress
for 45-60 secs, press pressure 20-25

Poli-Hi Coatings for Dye Sublimation
UV Curable (Zero VOC) coatings for different surfaces.

 UV unit needed 

 UV unit needed 

NO UV UNIT NEEDED

1-800-886-3331

SEPS GRAPHICS INC.   103 Trade Center Drive   Birmingham, Al 35244
1-800-886-3331    205-444-5554    fax  205-444-5545

A full graphics and sublimation supplier
www.sepsgraphics.com

Digi-Coat Clear Sublimation Coating

Digi-Coat Translucent White Coating

Overview
This specially formulated surface preparation provides superior readiness for sublimation inks.
Description
Designed specifically for use with the DigiCoat range of products of sublimation coating, DigiCoat Adhesion Promoter is used to prepare surfaces to receive DigiCoat sublimation coatings. DigiCoat Adhesion Promoter will enhance the adherence of coatings to slick and glossy substrates such as glazed ceramics, glass and polished metal.
DigiCoat Adhesion Promoter helps DigiCoat sublimation coatings form robust physical bonds with these surfaces.
8.45 liquid ounces (250ml)

Overview
A one part clear sublimation coating. Simple aerosol application with an oven cure creates sublimatable surfaces. Used for hard and soft substrates such as ceramic tiles, leather, metal, wood, glass etc.
Description
A one-part clear coating to convert virtually any heat and pressure tolerant material into a sublimatable substrate. Best with hard and soft substrates such as ceramic tiles, metal, wood, glass.

DigiCoat Clear  sublimation coating is an aerosol product, and application is simple. Care must be taken to apply coating in a consistent manner to promote a good final image, and several light coats may yield better results than one heavy coat. Allow to air-dry for 10 minutes, and then oven cure at 320F (160C) for 20 minutes.

Contents are estimated to coat about 20 square feet (2 square meters), although your coverage may vary. Actual coverage is affected by many factors, including:

>porosity of the substrate surface

>density of application

>number of coatings applied

Use caution - as with any aerosol product. Work with this product in well-ventilated areas, and away from any open flame. Read container for additional instructions prior to use.

Contents 13.5 oz (400ml)

Overview
Our special formulation to produce stunning photographs on glass and other clear substrates!
Description
Translucent White is a base coating designed to interact with DigiCoat Clear Coating to translucent white coating allows sublimators to decorate glass products like cutting boards, awards, and glass tiles. Translucent White lets sublimation ink pass through the white coating to produce strong, vibrant images.
Used together with DigiCoat Clear, DigiCoat Translucent White will let you produce stunning images onto glass or acrylic.
For sublimating glass or other clear material, the process begins with a coating of DigiCoat Clear, which is allowed to air dry for 5 minutes, and then a light coating of Translucent White over the Clear. The object is then oven cured at 320 degrees F (160C) for 20 minutes.
Contents are estimated to coat about 20 square feet (2 Sq meters), although your coverage may vary. As with the other DigiCoat products, coverage may vary and is affected by many factors, including:
>porosity of the substrate surface
>density of application
>number of coatings applied
Use with caution - as with any aerosol product. Apply in well-ventilated areas, and away from any open flame. Read container for additional instructions prior to use.
Contents 13.5 oz (400ml)

NOTE: DigiCoat is not recommended for use with acrylic products, as scrylics generally cannot withstand the heat required to cure the coatings, or heat and pressure required for dye sublimation.

400ml, or 13.5 oz

400ml, or 13.5 oz

DigiCoat UV Protection Coating

DigiCoat Opaque White Base Coating

Description
A UV protective over coat containing two types of UV inhibitors to give maximum UV protection. This UV coating is an air drying product and does not require a curing cycle. This over coat can be used on glass, metals, wood, plastics etc.

Overview
Want to sublimate over dark or black substrates? Use our new Opaque White formula!
Description
DigiCoat Opaque White is a base coating designed to interact with DigiCoat Clear Coating to decorate dark or black surfaces normally not available for dye sublimation.
Used together with DigiCoat Clear, DigiCoat Opaque White will let you convert virtually any heat and pressure tolerant material into a sublimatable substrate. Best with hard and soft substrates such as ceramic tiles, leather, metal, wood, glass.
DigiCoat Clear is an aerosol product, and application is simple. Care must be taken to apply coating in a consistent manner to promote a good final image, and several light coats may yield better results than one heavy coat. Allow to air-dry for 5 minutes, then oven cure at 320 degrees F (160C) for 20 minutes.
Contents are estimated to coat about 20 square feet (2 Sq meters), although your coverage may vary. Actual coverage is affected by many factors, including:
>porosity of the substrate surface
>density of application
>number of coatings applied
Use caution - as with any aerosol product - to work with this product in well-ventilated areas, and away from any open flame. Read container for additional instructions prior to use.
Contents 13.5 oz (400ml)

NOTE: DigiCoat is not recommended for use with acrylic products, as scrylics generally cannot withstand the heat required to cure the coatings, or heat and pressure required for dye sublimation.

400ml, or 13.5 oz

400ml, or 13.5 oz